Packaging Details
- Unit Type: piece
- Package Weight: 15.000kg (33.07lb.)
- Package Size: 1cm x 1cm x 1cm (0.39in x 0.39in x 0.39in)
ow.productDescripti
130L/min Alcohol Gasoline Liquid Pump 220V Barrel Liquid Transfer Pump
The medium:SB - 3-1 transportation acid, alkali, salt, oil, beverage and other media
-Widely used in chemical industry, petrochemical industry, fine chemical industry, dye chemical industry, environmental protection, water treatment, medicine, food and other departments
-At the same time is suitable for small and medium-sized oil fields, oil depot, oil refineries, gas station, station of agricultural machinary, enterprises and institutions, the team, vehicle ship transport gasoline, kerosene, alcohol, such as formaldehyde, acetaldehyde, diesel oil, light fuel such as ideal tool
-Pipe using 304 double tube design, outer tube 304 pipe material, pipe transmission te is 304 stainless steel, the base color with 304 stainless steel filter design;
The pipe length 1 meter.Inserted into the pipe diameter of 5 cm
In your use of this machine, please should according to CB38361-2 < > explosive environment with explosion-proof electrical equipment and the relevant provisions of the right to purchase use explosion-proof plug socket, and connected to the zero line, anti-static device with need to press at the same time
Note: in order to reduce the electrostatic accumulation has a risk, it is suggested that the flow rate is less than 130 l/min, head below 6 m, and can reduce the load, motor sealing strong, febrile is poor, so every time don\'t use more than 10 minutes, and load in the use of earth system.
The use and maintenance:
1.New or long-term on the electric pumping liquid pump, when unpacking the case using the 500 v megohmmeter, measure all electric parts and may reach the insulation resistance between metal parts, when close to working temperature should be not less than 7 megohm.
2.before use, must check whether the terminal is firm, reliable grounding wire must be strong.
3.check whether the power supply voltage and rated voltage, cannot be more than or less than 10% rated voltage of power supply.
4, the use of the pump, do not damage wire, avoid water, oil into the motor, switch, electrical parts.
5, banned under the condition of containing flammable and corrosive gas work, to ensure the safety in production and the normal work of the original electric.
6, if found to have abnormal noise when in use, should immediately stop and check the reason, to try to eliminate rear can continue to use.
7, this should not be empty pump running, when using, immediately stop pump the liquid absorption, due to the pump motor no-load speed can reach 10000 r/division, otherwise will be worn, universal joint, impeller serious will damage the pump pipe.
8, change the brush, brush wear to cannot use should immediately change, otherwise it will damage the commutator, serious will burn out motor.
9, electric pump pump should be checked regularly, at least once every three months to check, not frequently used should be maintenance once a month, maintenance should all apart, eliminate internal dust and grease.If too much on the commutator available alcohol scrubbing the commutator surface.If there are any damaged parts, should change the same parts.
10, need not when please placed in dry, clean without corrosive gas environment.
`;