Note: To measure the power of UV lamps, you need to purchase a professional UV instrument for testing. Using power measurement is a wrong test method
Voltage power about 40W Luminous efficiency power 400W
Portable air-cooled UV curing lamp, cold light source / high energy / long life
[Product name]: LED cold light UV curing lamp.
[Light source type]: Use imported UV LED chip (wavelength 395NM / 410NM / 365NM).
[Product Features]: It is suitable for the rapid curing of various UV shadowless adhesives. It has many features such as fast curing speed, strong penetration, no heat, small light decay, long life, low power consumption and energy saving.
[Product advantages]: Compared with traditional fluorescent tubes / mercury lamps, LED light sources have very obvious advantages:
1. Long life: 10 times longer than the traditional lamp type.
2. Cold light source, no thermal radiation, low temperature rise on the surface of the illuminated product, solving the traditional thermal injury problem. Particularly suitable for LCD edge banding, film printing, etc.
3. The calorific value is small, which can solve the problem of large calorific value of traditional equipment.
4. Light up instantly, no need to preheat, reach 100% power UV output immediately.
5. The service life is not affected by the number of openings and closings.
6. High energy, stable light output, good uniform effect, and improved production efficiency.
7. It does not contain mercury and does not generate ozone. It is a safer and more environmentally friendly alternative to traditional light source technology.
8, low energy consumption, power consumption is only 10% of the traditional lamp type, can save 90% of power.
9. Maintenance costs are almost zero.
[Operation Tip]: The LED ultraviolet lamp should be as close as possible to the surface of the cured object. The closer the distance, the better. It is best to keep it within 3-10 cm. Too long irradiation distance will affect the curing effect.