Tip 1: How to choose the right driver for the LED?
I met a lot of buyers and didn`t know how to choose the right LED driver.
First, you need to determine the lamp`s input voltage and input current by 100%, then select the matching voltage and current of the LED driver.
Example: We detected a bulb voltage of 40V and a current of 290mA.
So we should choose the 8-12W 280-300mA option.
Tip 2: Dear buyer, if you need a full power LED driver, please choose 280-300 current product, this is a full power LED driver.
Tip 3: The no-load test is forbidden. The voltage is too large and the data is inaccurate, so be sure to enter the bulb load test.
12-18W LED Driver£¨Use 3 years£©
Input Voltage : 90-265V
Output Voltage : 36-65V
Output Current : 280-300mA
18-25W LED Driver£¨Use 3 years£©
Input Voltage : 90-265V
Output Voltage : 54-87V
Output Current : 280-300mA
25-36W LED Driver£¨Use 3 years£©
Input Voltage : 90-265V
Output Voltage : 75-135V
Output Current : 280-300mA
Advantage £º
1-Transformer
Bold copper wire
Power is sufficient and temperature is low.
2-Chip
Adopting the first-line brand IC-Aishi
High quality intelligent constant current
Overvoltage protection, overload protection,
overheat protection, short circuit protection
No flicker
3-Electrolytic Capacitor
High frequency low resistance capacitor
In theory, if the LED driver is used for 8 hours a day, it can be used for 3 years.
If the LED driver uses a temperature below 70 ° C, it can even be as long as 5 years.
4-Processing Technology
All use mechanized patches, efficient and stable.
Eliminate manual soldering and lead to poor contact of electronic components.
5-Application Place
LED track light / LED bulb
LED Spotlight / LED Bulb / LED Corn Light
LED Strip Light / LED Tube Light / LED Table Lamp
LED panel light / LED chandelier / living room lamp