Upgrade Notification Features:
This product is upgraded the main functions are newly upgraded, and other functions remain unchanged.
1. The fan will automatically detect and start when it is turned on, and then turn off
2. Added intelligent temperature control to set a certain temperature to start the fan and turn off the fan
3. Added CT wire test function
4. Support new version of PC software
5. Support automatic current 1mA and 10mA automatic gear switching
6. Support background 150W, 300W, 450W, 600W power software selection
User manual and APP Download
1, User manual, PC software installation instruction and PC software and Android APP download link : https://www.mediafire.com/folder/7mqy150hmfusv/DL24MP
2, IOS APP: search E_test on iphone APP store to download
3. Android APP: https://www.mediafire.com/file/0jiio43c0vuu1wx/U_Meter-Phone_mobile.apk/file
--Product Parameter--
Electrical parameters
Test voltage£º2~200V
Working current£º0.2~25A
DL24-M Discharge power: voltage * current < 150 W
(The actual running current is limited by the maximum power, please adjust the current according to the law of energy conservation)
The built-in over-current, over-temperature, over-power safety protection functions, if the protection interface is popped up, please pay attention to the parameter adjustment, shall adjust to the maximum power, and then discharge, you can first slowly and smoothly adjust the preset value in the start and discharge, in order to adjust up to the maximum power for discharging
1.Product jumper position and Setting method
When product leave the factory, the default is: 150W (the jumper has been set to 150W)
When this product is at different powers, you need to set the jumper, please follow the following method to set£¡
@150W 20A
@300W 30A
@450W 35A
@600W 40A
2.Power software setting method
The factory default is 150W 25A. After you receive the goods, you need to splicing them in the above way. After the jump cap is set successfully, please set the software again £¨300W 450W 600W)
Let`s take the 600W software setting as an example, please see the picture below!
1) Apple Mobile APP:
Please search for E_test in the application store to download and install, then click the Bluetooth APP icon to open the software, and then click the Bluetooth icon above the software to enter the selection DL24-BLE to connect, you can achieve mobile phone remote wireless remote control settings and Measurement function, the discharge status can be viewed at any time on the mobile phone, various data cleaning is visible, the voltage and current power curve of the discharge, etc.
2) Android phone APP:
Scan the QR code on the back of the host to download the corresponding APP software or Android APP: search E-test at Google play to down load . After the installation is complete, open the software and click the Bluetooth icon to enter the direct selection of DL24-BLE to successfully use it online. (No need for Bluetooth pairing, the software Bluetooth icon directly selects DL24. can)
3) Computer Bluetooth wireless online APP:
First add the Bluetooth device to the serial port device of DL24-SPP on the computer, then scan the QR code on the back of the host to download the corresponding APP software and store it. Open the software without installing and select the Bluetooth serial port model just added. You can successfully use online
https://www.mediafire.com/folder/yhumeijk86fj8/DL24MP
Through testing various DC power adapters
Play and measure the current, voltage, power and other parameters of various DC power adapters
Use the DC power supply to connect the DC independent power supply port of the load meter, and then use the "Settings" button to connect as shown in the figure below.
Precisely adjust the current to test the voltage and rated current of the power supply
The DC power supply can also be aged for a long time, with strong functions, simple operation, convenient and quick testing
Intelligent one-key full automatic detection of DC power supply
PT mode of charger current power performance
Press and hold the M button in the menu until the mode bar flashes, wait a while after pressing the ten-key PT mode
Automatically enter the DC power supply/charger auto-detector mode, then plug in your tested power supply and
Charger, then short press the start button, it will automatically start to run for a period of time and then report
Displays 4 kinds of important numerical results, making complicated tests instantly simplified, accurate, and easy to use
Buy this product, you can freely modify it into your favorite style for reference only
150W Product List
1.DL24M -150W Color Display Bluetooth Digital Control Curve Version Load Tesr x1
2.DC12V 1A power supply x1
3.Male and female screws X5 sets
4.Temperature probe x1
5.Red and black single line crocodile clip line x1
6.US to EU adapter x1
300W Product List
1.DL24M-150W Host Color Display Bluetooth Digital Control Curve Version Load Tesr x1
2.DC12V 1A power supply x1
3.Male and female screws X5 sets X2
4.Temperature probe x1
5.Red and black single line crocodile clip line x1
6.US to EU adapter x1
7.150W fan accessories X1
450W Product List
1.DL24M-150W Host Color Display Bluetooth Digital Control Curve Version Load Tesr x1
2.DC12V 1A power supply x1
3.Male and female screws X5 sets X3
4.Temperature probe x1
5.Red and black single line crocodile clip line x1
6.US to EU adapter x1
7.150W fan accessories X1
600W Product List
1.DL24M-150W Host Color Display Bluetooth Digital Control Curve Version Load Tesr x1
2.DC12V 1A power supply x1
3.Male and female screws X5 sets X4
4.Temperature probe x1
5.Red and black single line crocodile clip line x1
6.US to EU adapter x1
7.150W fan accessories X1