Package include:
13 pcs ER120 Collet
(1mm,2mm,3mm,4mm,5mm,6mm,7mm,8mm,9mm,10mm,11mm,12mm,13mm)
Feature:
Type:ER20 Collet
Material:65Mn
Run-out tolerance Accuracy: 0.008mm.
Type: Machine Tool Accessories.
Brand: Collet chuck.
Applicable machine: CNC machine.
Model:13pcs,ER20(1mm,2mm,3mm,4mm,5mm,6mm,7mm,8mm,9mm,10mm,11mm,12mm,13mm)
¡¼Material¡½ Made of 65Mn spring steel, they are stable in performance - fine workmanship, good elasticity, high precision Note: ¡¼grip range¡½1-13mm (1¡¢2¡¢3 ¡¢4¡¢5¡¢6¡¢7¡¢8¡¢9¡¢10¡¢11¡¢12¡¢13mm).
¡¼Exhaust Tolerance¡½0.015MM (0.0006 "), Widely used in drilling, CNC milling lathe, threading, grinding, tool engraving machine.
¡¼Easy to distinguish¡½ Each Collet is Well Packed in Separate Protective Container with Label, Moreover, Each Collect is Mark with Size, So it¡¯s easy to distinguish them.
¡¼Application¡½ Suitable for Boring, Milling, Drilling, Tapping, Engraving, CNC,Spindle Machines, and other processing.
Description: Select high-quality carbon steel. Hardened & precision ground. Big clamping force and wide clamping range , widely used in machining centers, general milling machines, CNC milling machine, engraving machine, high-speed machines, and other processing.
Installation method of chuck and nut :
1. Put the chuck into the pressure cap and gently rotate the circlip until the eccentric part of the pressure cap is recessed into the circlip groove, push the circlip evenly in the arrow direction, and then it can be installed in the pressure cap.
2. Install the circlip together with the pressure cap on the chuck body or the spindle of the machine tool, clean the cylindrical shank of the tool and put it into the clamping hole, use a wrench to tighten the pressure cap evenly and firmly until the tool is clamped firmly use. (Note: Do not tighten the pressure cap when the tool is not installed, so as not to damage the circlip)
3. When changing the tool, use a wrench to loosen the pressure cap to bring out the chuck and tool, remove the tool, push the circlip in the direction of the arrow to make it exit, and then replace the circlip with other apertures as needed.