|
aHR0cDovL2ZyZWVzaGlwLmNvLmty
- À¯Çü: ¿¡¾î ·»Ä¡
- ¸ÂÃã °¡´É À¯¹«: ±×·¸½À´Ï´Ù
- ÃÖ´ë ÅäÅ©: 98N.m
- ¹«ºÎÇÏ ¼Óµµ: 160RPM
- ¸ðµ¨ ¹øÈ£: HIB-106
- ºê·£µå À̸§: Hero Is Back
- Drive Size: 1/2 inch / 12.5mm
- Recommended Torque Range: 14N.m-81N.m
- length: 265mm
- Pressure: 0.63Mpa-0.8Mpa
- Air inlet: 1/4 inch
- weight: 1.1kg
- Tightening bolt capacity: M10
¿É¼ÇÁ¤º¸[(175)HIB-106]
HOW TO USE? Pneumatic ratchet wrench. It can be used as a manual ratchet wrench. That is to say, it can also use no gas. It`s like a ratchet wrench. It can also be used as a pneumatic wrench for quick screw removal. The more difficult it is to disassemble the screw, the more quickly it can be disassembled by using the pneumatic function. The method of tightening the screw is the same. First, tighten the screw quickly by pneumatic force, and then apply proper force by hand.
¨ç1/2 Inch Drive¡£
¨èForward and reverse knobs¡£
¨éAlloy steel transmission shaft¡£
¨êExhaust port¡£
¨ëGreen handle¡£
¨ìMotor switch
¨íLabel
¨îInlet hole, lubricating oil filling port¡£
¨çlength£º265mm¡£
¨è height£º46mm¡£
¨é width£º40mm¡£
HIB-106, pneumatic ratchet wrench. It is the first ratchet wrench of "Hero Is Back" brand. It is a classic ratchet wrench. Green handle. Aluminum alloy shell. Maximum torsion 98N.M. The idle speed is 160 rpm. By converting high speed to low speed, it is converted to high torque.
1¡¢Exquisite and beautiful HIB-106, pneumatic ratchet wrench. Aluminum alloy handle. The maximum torsion is 98N.M. The idle speed is 160 rpm. The square drive head is 1/2 inch in size, or 12.5mm. Beautiful appearance.
2¡¢Green Aluminum Alloy Handle HIB-106, pneumatic ratchet wrench. The handle is made of aluminium alloy, light weight, high hardness, no rust and corrosion resistance. Green spray paint, very beautiful.
3¡¢Forward and reverse knobs HIB-106, pneumatic ratchet wrench. Positive and reverse can be adjusted by knob. It is very convenient to remove and top the screw. Convenient adjustment of forward or reverse
4¡¢1/2 Inch Drive The driving head of pneumatic ratchet wrench. The square head is 1/2 inch, or 12.5mm, on the opposite side. Suitable for sleeve of common type.
5¡¢Metal filter Metal filter. Prevent debris, dust, particles and other impurities into the cylinder, protect the cylinder from damage.
6¡¢Side vent Side vent. HIB-106 pneumatic ratchet wrench. The exhaust hole is on the side of the pneumatic ratchet wrench. When working, air is discharged through side vents. If lubricating oil is added, lubricating oil will also be discharged from the vent along with the air.
|
|
|
|
|