UT582+ Digital RCD (ELCB) Tester
UT582+ is mainly used to detect whether the RCD in the circuit can be triggered normally. It is only suitable for single-phase circuits with the supply voltage range of 195V~253V. Its voltage measurement range is 30V~600V, 45Hz ~65Hz.
Parameter
Specifications |
Range |
Accuracy |
RCD measurement |
Range setting |
Rated operating current |
Trip time |
|
X 1/2 |
10mA/20mA/30mA/100mA/300mA/500mA |
2000ms |
-10%~0% |
X 1 |
10mA/20mA/30mA/100mA/300mA |
1000ms |
0%~10% |
500mA |
300ms |
0%~10% |
X 5 |
10mA/20mA/30mA |
40ms |
0%~10% |
AUTO RAMP |
10mA/20mA/30mA/100mA/300mA/500mA |
300ms |
-10%~10% |
Trip time accuracy |
±(2%+2) |
Operating voltage (Freq.) |
195V~253V |
Voltage measurement |
Voltage range |
30~600V |
Frequency |
45Hz~65Hz |
Resolution |
1V |
Accuracy |
±(3%+3) |
Features |
Display count |
999 |
Power o? gear |
¡î |
Low battery indication |
<7.2V |
APO |
Auto power o? fuction |
LCD backlight |
¡î |
Data hold |
¡î |
Phase angle selection |
0° and 180° |
Connections check |
Simultaneously test the trip time and trip current |
AUTO RAMP |
¡î |
Disconnect buzzer |
¡î |
Over-range display |
OL |
Fused |
¡î |
Mis-operation buzzer |
¡î |
Power o? buzzer |
¡î |
Full icon display |
¡î |
Compliance standard |
IEC 61010-1, IEC 61010-2-030, IEC 61010-2-033, IEC 61557-1:2007;IEC 61557-6:2007, EN61326-1, EN61326-2-2 |
Lead sequence check |
LCD |
General Characterisitics |
Power |
1.5V battery (LR6) x 6£¨No include) |
Display |
71mm x 34mm |
Product color |
Red and grey |
Product net weight |
400g |
Product size |
160mm x 100mm x 71mm |
Notice please: battery no include!