aHR0cDovL2ZyZWVzaGlwLmNvLmty
- ¸ðµ¨ ¹øÈ£: 2022428
- Èû À¯Çü: Electric
- ºê·£µå À̸§: LISHEN
- ±Ù¿ø: CN (Á¤Ç°)
- À¯Çü: Á¤¿ø Æļâ±â
- Áõ¸í¼: NONE
Rice machine household peeling machine rice deworming machine rice shelling grinder new combination rice milling machine
[Product name] : Rice milling and crushing machine
[Rated voltage]: 220V/380V
[Electric speed]: 2800 rpm
[Supporting power]: 2.2-4 8KW
[Machine weight]: 42KG [without motor]
[Shelling rate]: more than 99.8%
[Dimensions]: 52*35*125CM
Purchase Notes
1. Please connect the wire of more than four square meters for the incoming wire of the motor, and connect it to the electric meter for use; voltage,It must be above 220V, if the voltage is too low, it will burn the motor.
2. The machine should be plugged in and run for about half a minute before discharging, so that the machine will not be stuck.
In order to ensure the service life of the motor, please rest after working for about 2-3 hours.
3. For the sake of safety, please be sure to check each part of the machine before each use.
Whether the screw is loose, if it is loose, please tighten it before use!
Operation method
Rice milling machine operation method
1. Before starting the machine, carefully check whether the fasteners in each part of the machine are loose, and open the cover to check whether the gap between the rice rolls is correct.
2. Turn on the switch, and wait for 1-3 minutes of idle running. If the operation is normal, it can be processed with feeding materials. When opening the feeding plug, the plug should be slowly pulled out to gradually increase the load of the machine, otherwise the sudden increase may cause the machine to block the car,
3. When the machine is stopped in the middle, the feeding port should be closed first, so that the rice in the rice milling room is completely milled, and then the mill is stopped. Operation method
1. Turn on the power supply and run the machine empty for 3 to 5 minutes, check the temperature rise and noise of the bearing seat, and whether the vibration is abnormal. After the motor starts to run to the normal speed, slowly twitch the insert, and the feeding should be added evenly from less to more. Do not overfeed.
2. In the process of processing, the discharge port of the pulverizer should be checked at any time, and the discharge port should not be blocked.
3. After the material is processed, wait for the machine to run for 2 minutes, and let all the materials in the crusher come out before shutting down.
1.Payment:
-We accept the following payment methods:
-Credit Card, VISA, Bank to Bank Wire Transfers,PayPal, Western Union and so on.
-All payments made on AliExpress are processed by Alipay and PayPal.
2.Shipping:
-Please pay more attention to your order address which MUST MATCH your shipping address.
-Shipping will be worldwide via: e-Packet / China post air mail/ CDEK / ARAMEX/ EMS / UPS / FEDEX / DHL / TNT.
-Remote area may cause extra shipping fee.
-Please check items when delivered, if damaged, please kindly accept it and contact us immediately.We will make a confirmation and resend you a new one.
3.Warranty:
-1 years manufacture warranty:
We will offer your free new parts or accessories with free shipping during 3 months after your purchase.
We will offer your free new parts or accessories but you need to pay for some shipping fee if more than 3 months less than 1 year.
-Defective problem has to be submitted within 7 business days after product is delivered;
-Shipping damage has to be submitted within 5 business days after product is delivered.
-Please show us photo or video if happens problems on products.
4.Contact us:
-If you want to place a large order for wholesale, please feel free to contact us.
-If you need to order multiple items, pleases let us know first. We can offer you some discount.
5.Feedback:
-All products are 100% original new and tested again before shipment.Customers' satisfactory is our goal.
-Any feedback from you will be much appreciated. If you're satisfied with our service or products, please give us 5 stars.
-If you have any questions, please contact with us, and we will get back to you sooner.
6.Please Note:
-Import duties, taxes and charges are not included in shipping cost.
-Buyers bear all responsibility for all extra charges incurred (if any).
-What if you are dissatisfied with the products,Or the products has any quality problems ,Please contact me at any time,we will solve your problem,unnecessary to submit a dispute.
-For our customers from Brazil,Chile,South Korea:Please leave your tax number so that ensure our delivery normally.