433.92MHz Rolling Code AVIDSEN 114253 104250 104251 104257 104350 654250 114235 104250 RED Garage Remote Control Door Command
Kindly note
Our remote is the COMPATIBLE / REPLACEMENT /CLONE remote , not the original one .
please make sure your remote / system can be used before buying .
As a general guide, if the remote you currently use is one of the remotes pictured in the ad then this remote will be compatible with your motor.
if you are not so sure , please contact us without hesitate
Compatible
AVIDSEN 114253
AVIDSEN 104250
AVIDSEN 104251
AVIDSEN 104250 OLD
AVIDSEN 104250 RED
AVIDSEN104257
AVIDSEN 104350
AVIDSEN 654250
AVIDSEN 114235
433.92MHz rolling code
Description
Rolling code AVIDSEN
1.Type of programming: Programming with the receiver
2.Number of channels: 4
3. Code: rolling code
4. Frequency: 433.92MHz
5.Woring Range: 10-50 m (open space)
6.Power supply: CR1632
7.Remote come with Battery !!!
Security of use: dynamic code provides a high level of security, non-copyable code.
Disclaimer:Your Old remote must be same as the advertisement , new remote do not compatible with other remotes .
programming
AVIDSEN Rolling Code
1. Open the casing of your receiver. It is located next to your motor.
2. On the receiver circuit board, press the programming button (PGM). The LED light of the receiver illuminates. Let the button go.
3. In the next 10 seconds, press a button on your new remote control. Let it go.Wait 10 seconds.Your new remote control is programmed.
Included
Remote control
Battery
Keychain
English instruction manual