|
aHR0cDovL2ZyZWVzaGlwLmNvLmty Item specifics - is_customized:
- Yes
- Holding Torque:
- 2.8NM
- Type:
- Hybrid
- Brand Name:
- longs motor
- Phase:
- 2
- Current / Phase:
- 4.2A
- Certification:
- CE,ISO,ROHS
- Step Angle(degrees):
- 1.8degree
- Model Number:
- 23HS9442
- condition:
- new
- Place of Origin:
- Jiangsu, China (Mainland)
Packaging Details - Unit Type:
- set
- Package Weight:
- 7.500kg (16.53lb.)
- Package Size:
- 25cm x 30cm x 25cm (9.84in x 11.81in x 9.84in)
Great News for European customers! Our products are shipped from German warehouse directly . after payment, within 3 ~5 business days for receiving products! Easy to custom clerance, no damage, better service, please don\'t hesitate! SHIP TO BELOW FOR FREE: France, Italy, Sweden, United Kingdom Austria, Belgium, the Netherlands, Denmark, Spain, Portugal, Ireland, Finland Estonia, Latvia, Lithuania, Poland, Romania, Slovakia, Slovenia, the Czech Republic, Hungary What\'s in Box? - 4 pcs Nema 23 stepper motor with 2.8NM 4.2A,4WIRES
- 4 pcs stepper motor driver DM542A, peak 4.2A, 128 micsteps, replacing M542
- 2 pcs Power supply 350Watts (36VDC/9.7A)
- 1 pc Breakout board & 1 pc Parallel cable
Detailed information: 1. Nema 23 stepper motor: Stepper Motor Technical Specifications Part No.: 23HS9442 Frame Size: NEMA23 Step Angle: 1.8 degree Voltage: 3.78VDC Current: 4.2 A/phase Resistance: 0.9 Ohm/phase Inductance: 3.8 mH/phase Holding torque: 2.8NM Rotor inertia: 810 g-cm2 Detent torque: 1.2 kg-cm Number of wire leads: 4 Weight: 1.55KG Length: 115mm Front shaft diameter: 8mm Front shaft length: 21mm round shaft Black A+ Green A- Red B+ Blue B- 2.Stepper motor driver DM542A: DM542A is a type of two-phase hybrid stepping motor driver, The drive voltage of which is from 18VDC to 50VDC. It is designed for use with 2-phase hybrid stepper motor of all kinds with 42mm to 86mm outside diameter and less than 4.0A phase current. This circuit that it adopts is smiliar to the circuit of servo control which enables the motor run smoothly almost without noise and vibration. Hording torque when DM542A run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is also higher. It is widely used in middle and big size numerical control devices such as curving machine, CNC machine, and computer embroider machine, packing machines and so on. Features: High performance, low price Average current control, 2-phase sinusoidal output current drive Supply voltage from 18VDC to 50VDC Opto-isolated signal I/O Overvoltage, under voltage, overcorrect, phase short circuit protection 15 channels subdivision and automatic idle-current reduction 8 channels output phase current setting Offline command input terminal Motor torque is relased with speed, but not related with step/revolution High start speed High hording torque under high speed 3. Power supply: The power of this power supply is 350Watts, and the output voltage/current is 36VDC/9.7A. 4. Breakout Board: - Built in DB25 male connector.
- DB25 Output Pin:P1,P2,P3,P4,P5,P6,P7,P8,P9,P14,P16,P17.
- DB25 Input Pin: P10,P11,P12,P13,P15.
- DB25 GND Pin: P18-P25.
- Power supply: +5V DC.
- Built in C-class Optical-coupler.
- High quality with Surface-mount Tech.
Whats more, our products are mainly used in CNC machine, Carver machine, Automazation, Printer, Stage lighting and so on. If you have any questions about our products, please dont hesitate to contact me. And I will try my best to support you. Hello,dear friend,thanks for you visiting my store very much.if you have any questions or need more detailed info of our goods,please feel free let me konw,I\'ll try my best to support you,thanks. Wish you have a good shopping!:-)
|
|
|
|
|