Feature:
1. DETECTION TYPES: Identify specific types of metals through frequency regulator, and detect gold, silver, copper, conventional metals, etc.
2. HIGH ACCURACY: With long range search system and accurate position detection system, ensure high operation sensitivity and good stability.
3. HIGH EFFICIENCY: Micro electronic processor is used to control chip unit calibration, with self test system, can scan and test conveniently and quickly.
4. WITH BATTERY: The detector and receiver are equipped with rechargeable batteries, suitable for long term detection, efficient and practical.
5. MULTIPLE USAGES: The metal detector is not only used for military purposes, but also for safety inspection, archaeology, outdoor prospecting, etc.
Specification:
Item Type: Metal Detector
Material: ABS, Sponge Coating
Detector Battery: Built in rechargeable battery (NiCr) 2000mAh
Receiver Battery: Built in rechargeable battery (NiCr) 2000mAh
Purpose: In addition to military applications, widely used in security inspection, archaeological exploration, and mineral exploration
Detected Objects: Gold, silver, copper, conventional metals (Pd, Pt), stones (, emerald, ruby, etc.)
Search Range: Approx. 1500 meter / 4921.3ft
Detection Depth: Approx. 50 meter / 164ft maximum
Transmission Frequency: 5.6-6KHz
How to Use:
1. Hold the detector, scan slowly in an arc, and turn yourself together. At this time, the explorer elbow should always be close to both sides of the body, and it can be turned about 40 degrees to 60 degrees. Explorers must rotate slowly and keep their body stable.
2. Standardize your scanning action. First of all, let the receiving antenna properly extend and open. Make the receiving antenna right in front of you, open at 90 degrees with your body, and cannot deflect to the left and right sides.
3. When the antenna is aimed at the target, the detectorwill be determined, although you continue to explore beyond the target. When you think this determination is effective, you should remember this direction. Then, move the detector about 10 meters to the left or right, and repeat the process of determining the policy just mentioned. Observe the determined direction this time, and the intersection of the two directions is the buried position of the target.
4. If you think there is a certain deviation in the specific direction measured just now, you can determine it from another viewpoint. If the target is within 10 meters or so, you should walk slowly and steadily along a fixed route. When you pass the target and are directly above it, the antenna of the detector will shake on both sides. At this time, the measured position is very accurate. (Please refer to the manual for specific operation instructions) The product has degaussing function (degaussing can be achieved as long as the probe of the receiver is close to the ferrous metal and the alarm is given 3 times)
Package List:
1 x Detector
1 x Receiver
3 x Rods
1 x Adapter
1 x User Manual
1 x Storage Box