72'' inch M Shape Diamond segments teeth heads for Diameter 1800mm Combination mine saw blade cutting bluestone 15/20mm Height.
RC means the segments are suitable to cut?reinforced concrete.
Use for Diameter(mm) | Long(mm) | Height(mm) | Thickness(mm) | Tooth number |
Short teeth |
350 | 40 | 12.5/15 | 3.4 | 24 |
400 | 40 | 15 | 3.8 | 28 |
500 | 40 | 12 | 4.2 | 36 |
525 | 40 | 12 | 4.2 | 36 |
600 | 40 | 12 | 4.8 | 42 |
700 | 50 | 12/15 | 4.8 | 46 |
800 | 50 | 12/15 | 5.2 | 50 |
900 | 50 | 12/15 | 6.0 | 50 |
Long teeth |
1000 | 24 | 12.5/13.5 | 7.4/8 | 72 |
1200 | 28/24 | 12.5/13.5 | 7.4/8 | 80 |
1400 | 28/24 | 12.5/13.5 | 8.2/8.8 | 92 |
1600 | 28/24 | 13/15 | 8.6/9 | 108 |
1800 | 28/24 | 13/15 | 9.8/10.2 | 120 |
2000 | 28/24 | 13/15 | 10.8/11.2 | 132 |
2200 | 28/24 | 13/15 | 10.8/11.2 | 136 |
2500 | 28/24 | 13/15 | 10.8/11.2 | 136 |
Uses:
??? Different size of diamond segments, used for cutting, grooving and slotting of various granite, marble, sandstone, ceramics, asphalt and other stone.
Characteristics:
1. NCCTEC diamond segments using diamond sheet material and metal carcass (Ti + Cr + Ni + Co) form a chemical bond can be reduced the segment loosing, raise the life.
2. change the single cutting to the combination of blade cut, optimize the sawing performance.
3. sharp tip, fast cutting speed and high cutting efficiency.
4. wear coefficient, long life and the overall cost-effective.
5. fast cutting, small slits, cut out the stone surface smooth, even in size.
Note:
Factory should add a certain amount of cooling water daily for tip cutting, the sprinkler flow should be large to have a better cooling effect!
the Combined Saw blade speed at 280 - 320 r / min, the trolley speed can't be too fast!