Specifications:
Display Type:Digital
Style:Standing Station
Temperature sensor: NTC 10K
Senor length:1.0m
Temperature measuring range: -55 ° C ~ 120 ° C
Resolution: 0.1 ° C
Accuracy:±1° C
Power supply: 110-220VAC 50/60Hz, 12V DC , 24V DC(Please choose power supply when ordering)
Power consumption: <3W
Storage temperature: -30 ° C ~ 75 ° C
Relative humidity: 20% ~ 85% (No condensate)
Relay contact capacity: Two Relay Cool 10A/240VAC;Heat 10A/240VAC
Tips:
If you need extra Temperature Sensor. Please click here
Package Centents:
1X Temperature Controller
2X Waterproof Sensor
-------------------------------
Set startup temperature:
Press the "up" button once to display the starting temperature. Long press the "up" button for about 3 seconds,The required temperature can be set by the up and down keys
Set the stop temperature:
Press the button once to display the stop temperature. Long press the button for about 3 seconds and the stop temperature number flashes. The required temperature can be set by the up and down keys
Press "Up 1" Button & "Up 2"Button at the same time to setting mode
Code |
Function |
Set Range |
Default |
P1 |
Compressor 1 delay time |
0-60min |
0min |
P2 |
Compressor 2 delay time |
0-60min |
0min |
P3 |
High temperature alarm value |
55-120 ° C |
120 ° C |
P4 |
Low temperature alarm value |
55-120 ° C |
-55 ° C |
How to restore factory Settings
press the "Down 1" and "Down 2" button at the same time, the factory setting is restored
Heating Mode--Start temperature<Stop temperature
Cooling Mode--Start temperature>Stop temperature
You can set 1 heating 1 cooling or 2 cooliong or 2 heating.
Notes: There is no voltage output directly, you need to use additional power supply for the load.