LCR-T7 New Transistor Tester TFT Diode Triode Capacitance Meter LCR ESR meter NPN PNP MOSFET IR Multifunction Tester Multimeter
Note:
In order to protect the safety of your product, the test capacitor must be discharged first to avoid electrostatic breakdown of the chip and burn the product.
A full-color display multi-function test instrument
1. It can measure triode, diode, resistance, capacitance, inductance, thyristor, field effect tube, voltage regulator tube, double diode, light emitting diode, etc.
2. Can measure voltage
3. Built-in lithium battery, long battery life
Description:
@Charging please use an external 5V power supply or mobile phone USB power supply
@The indicator light is red to indicate that it is charging, and the indicator light is green to indicate that the charging is complete
Reminder: The charging input voltage is up to 6V, please do not use overvoltage, otherwise the tester will be damaged and the battery may explode
4. Infrared decoding function
Point the infrared remote control at the "IR" test hole of the tester, and press the remote control button
If the tester decodes successfully, the user code and data code will be displayed, and the corresponding infrared waveform will be displayed.
If the decoding fails or cannot be decoded, the user code and data code will not be displayed. At this time, if you are on the tester interface, you cannot enter the infrared decoding interface, if you are on the infrared decoding interface, the last successful decoding information will still be displayed
The dot in the upper right corner is used to indicate whether the infrared data from the remote control is received, red indicates that infrared data is being received, and blue indicates successful decoding
5. Automatic calibration
Short-circuit the three test sockets, short press the multi-function button, and the tester will automatically calibrate.
After the short-circuit wire is disconnected according to the prompts during the calibration process, no other operations are required.
160x128 TFT display
- Multi function key
- Transistor test area
- Zener Diode test area
- IR receiver window
- Micro USB Charging Interface
- Charge indicator LED
1.1 Features
TC-V2.12k is a TFT graphic display Multifunction Tester.
l Transistor Tester
-
- Automatic detection of zener diode0.01-30V
- Self test with automatic calibration
l IR decoder
- Support Hitachi IR coding
- IR waveform display
- Infrared receiving instruction
l Other
- Measurement results using TFT graphic display(160x128)
- One key operation
- Auto Power Off(Timeout Settable)
- Built-in high capacity rechargeable Li-ion Battery
- Li-ion Battery voltage detection- 160x128 TFT display
- Multi function key
- Transistor test area
- Zener Diode test area
- IR receiver window
- Micro USB Charging Interface
- Charge indicator LED
1.1 Features
TC-V2.12k is a TFT graphic display Multifunction Tester.
l Transistor Tester
-
- Automatic detection of zener diode0.01-30V
- Self test with automatic calibration
l IR decoder
- Support Hitachi IR coding
- IR waveform display
- Infrared receiving instruction
l Other
- Measurement results using TFT graphic display(160x128)
- One key operation
- Auto Power Off(Timeout Settable)
- Support Chinese and English
Warning: Built-in Li-ion Battery, it is strictly prohibited the tester immersed in water, or near a heat source!
Warning: For your personal safety, please strictly comply with the use of Li-ion Battery specifications and precautions!
1 Operating Instructions
1.1 Key operational definitions
Multi-function key has two actions:
l Short press: Press the key and not less than 10 ms, release key within 1.5 seconds
l Long press: Press the key more than 1.5 seconds
1.2 Power on
In the power off state, short press the multifunction key, the tester is turned on and automatically measured.
l Power on & measurement interface
1.3 Detect transistor
In the power off state or the test is completed, put the test element into the transistor test area of test seat, and press the locking handle, short press the multifunction key, the tester automatically measure, graphical display of measurement results when testing is complete.
Warning: Always be sure toDISCHARGEcapacitors before connecting them to the tester! The tester may be damaged before you have switched it on!
Warning: We do not recommend using the tester to measure the battery! The battery voltage must be less than 4.5V, otherwise the tester may be damaged!
l Component placement
Test seat are divided into transistors and zener diode test area, detailed in 1.1 Description.
Package Included:
1set x LCR-T7 TFT Transistor Tester