|
aHR0cDovL2ZyZWVzaGlwLmNvLmty Item specifics - is_customized:
- Yes
- Brand Name:
- setctop
- Motor Type:
- DC Motor
- Model Number:
- 1
- Place of Origin:
- China (Mainland)
Packaging Details - Unit Type:
- piece
- Package Weight:
- 0.700kg (1.54lb.)
- Package Size:
- 20cm x 10cm x 8cm (7.87in x 3.94in x 3.15in)
p> TB6560 3A 57 stepper motor drive system MACH3 three-axis drive system Interface board: 1.Introductions: 1), full support for MACH3, KCAM4, EMC2, the PC software to support parallel port control; 2), leads to all the parallel port of all 12 data transmission output pin, which can control the five stepper motor driver at the same time; 3), with 5-way input interface, you can access the limit switches and emergency stop switch, reset , knives; 5 ways input, LED indicates the status of the input; 4), all the way with a 12A relay control, normally open, normally closed leads, user-friendly connection; 5), power supply with 5V USB power supply or external power supply .On the external drive enable signal amplification, filtering, enhancement processing; 6), To the pulse, the direction of signal shaping, enhanced with a carrying capacity, data transmission speeds reach 10 MBit / S; 7), the output pin with extension interfaces can use 2.54mm pin 2.54mmXH-Block; DB25 pin definitions PIN | Function | Directions | PIN | Function | Directions | 1 | EN | Enable control signal | 10 | IN1 | input interface 1 | 2 | STEPX | A (the first axis) pulse signal | 11 | IN2 | input interface 2 | 3 | DIRX | A (the first axis) direction of the signal | 12 | IN3 | input interface 3 | 4 | STEPY | B (the second axis) pulse signal | 13 | IN4 | input interface 4 | 5 | DIRY | B (the second axis) direction of the signal | 14 | RLY | Relay control signal | 6 | STEPZ | C (the third axis) pulse signal | 15 | LIMIT5 | input interface 5 | 7 | DIRZ | C (the third axis) direction of the signal | 16 | STEPB | E(the fifth axis) pulse signal | 8 | STEPA | D (the fourth axis) pulse signal | 17 | DIRB | E(the fifth axis) direction of the signal | 9 | DIRA | D (the fourth axis) direction of the signal | 18-25 | GND | Ground signal |
Interface terminals instructions name | Directions | Remark | Parallel port | access the computer DB25 pin connector | With the computer communication interface | USB | Access the computer usb | 5V power interface | +5V | External power supply +5V input interface | | GND | External power ground | With the usb power | IN5 | External limit input interface | Internal pull-up, low indicator light | IN4 | ditto | ditto | IN3 | ditto | ditto | IN2 | ditto | ditto | IN1 | ditto | ditto | NO | relay normally open contacts | When the parallel port P14 is low, this pin is connected with the com port | COM | Relay common terminal | | NC | Relay normally close contacts | When the parallel port P14 is low, this pin is not connected with the com port | +5V | +5V output pin | connected drive optocoupler anode | EN | Enable output pin | TTL Level standard | DIR | Direction output pin | ditto | STEP | Pulse outputpin | ditto |
Electrical Characteristics | Minimum | Rated | Largest | Unit | Remark | Power voltage | 4.5 | 5 | 5.5 | V | | Input VIH | 2 | | 0 | V | IN1~IN5 | Input VIL | | | 0.8 | V | IN1~IN5 | Output VOH | | 5 | | V | EN,DIR,STEP | Output VOL | | 0.1 | | V | EN,DIR,STEP | Output IOH | | 20 | | mA | EN,DIR,STEP | Input IOL | | 24 | | mA | EN,DIR,STEP |
ST330 Stepper Motor Driver Board (1) the use of new imported Japanese Toshiba TB6560 chip (disguising); (2)The base is made of dense teeth radiator, cooling superior, to ensure the stable operation of equipment; (3) the input signal using a high-speed opto-isolation to ensure not losing steps, which the pulse direction signals with the same level of 6N137, dual high-speed optocoupler; (4)Multiple semi-flow mode and flow of current selection, more flexible (5)Decay mode is adjustable to ensure the motor running smooth; (6)The size of the cooling pad: 75mm * 65mm, four mechanical installation positioning hole size: 67mm * 58, mounting hole diameter is 4mm (7)With anti-reverse circuit, even if not careful the power plug back and will not burn the chip, safer Package include:
|
|
|
|
|