aHR0cDovL2ZyZWVzaGlwLmNvLmty Item specifics
- Power:
- Electric
- Structure:
- Single-stage Pump
- Brand Name:
- Warner Technology
- Pressure:
- Low Pressure
- Application:
- Submersible
- Standard or Nonstandard:
- Standard
- Usage:
- Water
- Theory:
- Centrifugal Pump
- Model Number:
- DC50D-1240S
- Fuel:
- Electricity
- Driving method:
- Brushless, magnetic, 3phase
- Working Temperature Range:
- -10~100 Degrees Celsius
- Working condition:
- Submersible installation, can be continuously working
- Fluids:
- Water, oil, acid and alkali solution etc
- Rated voltage:
- 12Vdc
- Max rated current:
- 3.8A
- Max flow rate:
- 36L/Min(9.5GPM)
- Water proof class:
- IP68(can be submersible installed)
- Life span:
- >30,000hrs, can be continuously working
- Place of Origin:
- Guangdong, China (Mainland)
Packaging Details
- Unit Type:
- piece
- Package Weight:
- 0.700kg (1.54lb.)
- Package Size:
- 13cm x 8cm x 14cm (5.12in x 3.15in x 5.51in)
p>
12V Micro Brushless DC Submersible Pump
3phase brushless design, No spark, Absolute safety
Can stand high temp. as 100 degrees, pumping boiling water/oil
Max Static Head 4m, Max Flow Rate 2100LPH
Low Noise, Completely Water Proof
Specifications of this Pump
&&Micro Size: 100.5mmx84.5mmx64mm
&&Light Weight: only 500g
&&Dimension of Inlet and Outlet: 20mm O.D., fit for motorcycle/car application
&&Power Saving: 45.6W
&&Low Noise: Less than 40dB
&&Wide Working Voltage Range: 5-12Vdc (12V rated)
&&Max Static Head: 4m(13ft)
&&Max Flow Rate: 36L/Min (9.5G/Min)
&&Fluids: Water, oil, gasoline, acid and alkali solution, etc
&&Power Supply: can be battery, DC electric source or solar panel, etc
&&Super Long Life: >3years, can be continuously working, without maintenance
&&Water Proof Class: IP68 (Fit for submersible installation)
Typical Features
>>3Phase brushless, permanent magnetic rotor, maintenance-free, long life
>>Can stand high temperature 100 degrees Celsuis, continuously pumping boiling water
>>Locked-rotor and reverse connection circuit protection, automatic overload protection
>>Soft-start with low in-rush current
>>Small size, high efficiency, low consumption, low noise
>>Stator and circuit board sealed by epoxy resin, completely water proof
>>Sleeve and shaft with carbon fiber materials, better performance than ceramic and metal materials
>>Parameter adjustable, 12v pump?s head can be adjusted from 2m to 4m
>>Can be customized for friends with bulk product demand
This pump has a wide range of aplications, such as car cooling, motorcycle cooling and other vehicle cooling, landscaping and garden pumping, PC cooling system, humidifier, medical device, and many other cooling and circulation system.
It is exported to Europe, America and Japan market by a large number of international agents and through platforms such as eBay, Amazon, Yahoo! and MercadoLibre. At home, products of similar type have been successfully applied to several well-known companies such as Comet Group, Haima Motor and HuangMin Solar.
By the way, pumps have been tested and are being tested by our factory and many company-level customers for their product requirements. It can continuously work for more than 1.5yrs with steady performance and low noise below clean water in these tests. Some tests are still going on.
Dimension
Parameters (The technical specification only for reference, it can be customized for bulk demand)
Head-Flow curve graph
Package included
1 x 12V micro 3phase brushless dc submersible pump
Cautions about usage
@@Working without liquid is prohibited, or it will damage or even burn the pump permanently for high temperature and abrasion.
@@Pumps can normally work when submersible installation or outside installation under the premise of a steady liquid flow into pumps.
@@Try to prevent hard articles entering pumps.
@@Pumps should work under specified temperature, higher temperature can result in magnet demagnetization and circuit performance degration.
@@Circuit polarity cannot be reversed and pumps cannot be directly connected with AC power supply without AC/DC transformer for they are DC pumps.
How to choose the most suitable pump
##Make sure of the working voltage, current, head and flow. Note that head means the maximum height that water can reach inside the external hose of outlet. If you want to get some flow at some height, you should retain a certain margin wtih these parameters. (refer to Head-Flow Curve graph)
##Make sure that the dimension can fit the application, such as the overall size of the pump, whether it is threaded interface, the direction and diameter of outlet and inlet, etc.
##Determine the working environment, such as working temperature, medium, etc.
##Take other requirements into consideration, such as time control, motion control, pressure control, flow control, and speed adjustable.